Please Note: Larsen's fire extinguisher cabinets are made to order and non-refundable. They are not a stock item. They are manufactured in their Florida and Minnesota factories. Depending on the options chosen the lead time can vary from 2-4 weeks. A customer representative will contact you with the lead time within 1 business day after the order is placed.
The cabinet shown is not an exact match. Please refer to the description and/or submittal to be sure you're ordering the correct cabinet.
The Cameo's design allows for the protection of the extinguisher into its protruding bubble and not only permits installation into a shallow wall but also results in full, 180 degree visibility of the extinguisher. The manufacturer's standard bracket, which is included with each fire extinguisher, must be used to support the extinguisher inside the Cameo cabinet. The standard door and trim material is steel, and optional materials include aluminum, stainless steel, solid brass, and solid bronze. All door frames are 1/2 inch thick, hollow-metal design. All units have a satin finish pull handle with a self-adjusting roller catch and a continuous piano hinge constructed of material which matches the door and trim. The Larsen-Loc is available with all door styles.
All recessed and semi-recessed cabinets and surface-mounted steel cabinets have a heavy gauge, white baked enamel box. Surface-mounted cabinets with aluminum door and trim have a box constructed entirely of clear or color anodized aluminum. Surface-mounted cabinets with stainless steel door and trim have a box constructed entirely of 304 stainless steel with a #4 finish.
TRIM AND DOOR SPECIFICATION:
The standard door and trim material is steel, and optional materials include aluminum, stainless steel, solid brass, and solid bronze.
Steel trims and doors are one piece, constructed of heavy gauge, cold-rolled steel with a standard finish of white baked enamel, which can be used as either a finish or prime coat. Aluminum trims and doors are constructed of extruded aluminum with a satin anodized finish. Clear anodized is standard, and a wide selection of optional color anodized finishes is available. All aluminum trim and door corners are mitered
- Trimless cabinets must be installed before drywall because their plaster stops must be behind the drywall. Trimless are not recommended for block wall installation.
- Deduct 3/4" from H x W dimensions for cabinets with aluminum door and trim.
- To comply with ADA wall projection guidelines, this cabinet must be mounted with its leading edge at or below 27" from the finished floor.
* Cabinet also available in Bronze or Brass. Please call 305-592-3011 for pricing or contact us by email.
Wall Installations and Trim Projections